vmware fusion 8.5 network adapter greyed out

In the VMnet Information section you can change the type of network, so from a Bridged one you can make a Host-only or a NAT network. If you are wondering why, I can explain to connect VMs to my second host in case resources are not enough on the first one. On my VMware Workstation, as you can see I have three Bridged networks, since I have three physical network adapters in my host PC. Here you can add, remove and change virtual networks configuration as you want.

To configure or modify this virtual networks go to the Edit menu and choose Virtual Network Editor. You can use this type of network when you don’t want the VMs to have direct access to the local network (the one the host is part of), but still can access it by IP. IP addresses are assigned by the virtual DHCP server to the VMs. The last network, “ NAT” creates a private IP network between your VMs and the host. To be able to do that, a DHCP server integrated into VMware Workstation will assign IP addresses to those VMs. By connecting to this type of network your VMs will not have access to internet or the local area network they can communicate only with the host. The Host-only network connects your VMs and the host into a private network. This is one of the most common virtual network choice among VMware Workstation users, because is easy to set up and you have access to your physical network without further configurations. When you connect a VM to the Bridged network, that VM will have an IP from the same subnet (192.168.0.x), if you have DHCP, if not you will have to configure the VM IP address manually. To illustrate this better, let’s say your home network has a subnet of 192.168.0.x. Those VMs will be part of the same network subnet as your host is like they are connected to the same switch, only that the switch is virtual.

The Bridged network is the one that connects your virtual machines to the physical network adapter on the host (the PC where VMware Workstation is installed). After you install the product, you have three virtual networks already preconfigured: the Bridged, the Host-only and the NAT network. Is not science, but if don’t understand how is working you’re in a bit of trouble creating proper labs and working with them.įor this guide I’m using VMware Workstation 9 which is the latest version at the time of this writing. If you are using VMware Workstation you will definitely came to the point where you need to configure or create new virtual networks.

Vmware fusion 8.5 network adapter greyed out